Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Roof Replacement in Inglewood: What It Costs and What the City Requires
A full roof replacement in Inglewood typically runs $9,800 to $22,000 for an average 1,400-square-foot home, with flat roof systems landing between $8,500 and $16,500 depending on material and decking condition. Most jobs take 2 to 5 days once permits clear. The city’s building department requires a permit for any roof work beyond basic shingle patching, which means the quote you get should always include compliance costs up front. If you’re pricing the job, call us at (866) 974-2271 for a written line-item estimate before you commit.
Inglewood throws a specific set of conditions at a roof. The constant aircraft traffic from LAX vibrates flashing loose and widens cracks around skylights. Santa Ana winds test every nail. And the housing stock, much of it built between 1945 and 1965, includes thousands of original built-up tar roofs that have been absorbing UV for decades. A replacement here isn’t the same job as one in Torrance or Culver City. It has to be planned around local code, wind ratings, and the reality of what sixty years of aircraft vibration does to a roof assembly.
Roof Replacement in Inglewood Done Once, Done Right
What separates a compliant Inglewood roof job from a disposable one comes down to documentation and materials. Out-of-town crews often skip the permit on smaller jobs to keep the price low. What they don’t tell you is that when a Santa Ana wind gust tears shingles off two years later, your insurer asks for proof the roof was installed to code. No permit. No inspection record. No claim. We pull permits on every replacement in the 90309, 90310, 90311, and 90312 ZIP codes, and the signed permit card goes in your hands at completion.
A compliant quote includes more than shingles and labor. It includes the permit fee, the inspection scheduling, the nailing pattern required to hold a 130 mph wind rating, and the underlayment and drip edge the code calls for but cheap contractors conveniently omit. Every Roof Replacement estimate we write for an Inglewood home includes these line items. If a competing quote doesn’t show them, you’re not comparing the same job.
Manny Cordero, who leads Koreatown Roofing, is particular about this. The roofs he installs in Inglewood are built to pass inspection the first time. Not because the inspector is difficult, but because a roof that passes inspection on Monday is the roof that holds up when the winds hit in October.
Styles & brands we work with






Why Inglewood Homeowners Choose Koreatown Roofing
We’re a roofing-only contractor. Every job we run is a roof: inspection, repair, or replacement. There’s no kitchen remodel happening in the background, no handyman crew “doing roofing on the side.” For an Inglewood homeowner with a 1950s flat roof that’s starting to bubble and split, that focus matters. We see the failure modes specific to this housing stock every week, because we’re on Inglewood roofs every week.
Our customers in Morningside Park, North Inglewood, and the tree streets off Manchester know they can reach us directly. You call, you get Manny Cordero or our service manager. Not a call center. Not a rotating franchise crew. The crew that shows up to your Inglewood home works for us, not a subcontractor we found on short notice.
And on materials, we’re not tied to one brand. We install GAF, CertainTeed, Owens Corning, IKO, Atlas, Tamko, and Boral. Your roof, your material choice. We walk you through what fits your budget and your wind-rating needs, then install it to the manufacturer’s spec and Inglewood’s code.
Flat Roof Replacement in Inglewood
Flat roof replacement in Inglewood needs a different conversation than pitched shingle work, because the housing stock demands it. A large share of post-war homes in the 90301 through 90305 neighborhoods were built with low-slope or fully flat roofs, often original built-up tar systems. These roofs don’t shed water the way an asphalt shingle roof does. They hold it, slowly draining toward internal scuppers or edge drains. When that drainage clogs or the membrane cracks from UV and vibration, water sits and finds a way in.
Built-Up Tar Roof Removal
The original tar-and-gravel roofs on mid-century Inglewood homes reach a point where patching no longer makes sense. The tar becomes brittle, the gravel wearing thin, and cracks open along seams. Removing that system means tearing down to the deck, inspecting for rot, and installing a modern membrane. It’s messy, heavy work that we handle in-house, and it typically runs $9,500 to $15,000 on a standard 1,200-square-foot Inglewood flat roof with a clean deck.
Modern Membrane Options
For Inglewood homes, we usually recommend a modified bitumen system like the GAF or CertainTeed products we install. They handle our UV load well and don’t mind the heat that bakes these flat roofs from June through September. If the deck has valleys or penetrations, we add ice and water shield at those points and strip in new flashing. This is where the aircraft vibration issue shows up most: flashing around skylights and plumbing vents loosens over time, and that’s almost always where leaks start on flat roofs.
Roof Installation in Inglewood
Roof installation in Inglewood covers new construction and full teardown replacements, and the code path is the same either way. The city requires a permit, an inspection at decking level before you cover anything, and a final inspection after the roof is complete. Skipping any of those steps leaves you with an unapproved roof that your insurer can use as a reason to deny a future claim.
New Construction Roofing
For the new infill townhomes and apartment buildings going up near the transit lines, we install roofing during construction and coordinate directly with the GC. The city’s inspectors want to see the nailing pattern on the exposed deck before underlayment goes down. We schedule that inspection ourselves and have the signed record before we proceed. On new construction, you want a roof that’s documented from day one, because the buyer or tenant down the line will ask for that paper trail.
Architectural Shingle Replacement
On Inglewood’s pitched roofs, most homeowners choose architectural shingles rated to 130 mph. They carry the wind rating the code expects for our exposure, and they look better than three-tab. But a 130 mph shingle with a four-nail pattern instead of the six-nail pattern the manufacturer requires is not a 130 mph roof. We follow the manufacturer’s nailing schedule exactly, and the inspection record shows it. A full architectural replacement on an Inglewood home runs $11,500 to $19,000 on average.
Trusted Brands We Service in Inglewood
Your roof, your material choice, and in Inglewood that means choosing from the brands you already trust. We install GAF systems for homeowners who want the Timberline name and its wind warranty. We install CertainTeed for those who prefer Landmark shingles. And we install Atlas, Tamko, and Boral products when they’re the better fit for the job. We stock common replacement parts locally and can order specialty products into Inglewood within a few days. No single-supplier dependency, which means our recommendation on your roof is based on the job, not on what one manufacturer happens to have in inventory.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Replacement Problems We See in Inglewood Homes
- Loosened flashing around skylights and vents. Constant aircraft vibration from LAX works nails and sealant loose over time. On flat roofs, this is the number one source of leaks we find during replacements in Morningside Park and North Inglewood.
- Cracked and brittle original tar roofs. Decades of UV exposure on built-up tar systems leaves the surface cracked and alligatoring. These roofs in the 90301 through 90305 areas often can’t be repaired piecemeal anymore; they’ve reached the end of their service life.
- Wind-damaged shingles from Santa Ana events. The Santa Ana winds that sweep through Inglewood each fall expose weak nailing patterns. Shingles that weren’t nailed to spec peel off in sheets, and we’ve replaced several roofs where the previous installer used the wrong pattern entirely.
- Wood decking rot under old flat roofs. Flat roofs that drain poorly hold water against the deck, and by the time the membrane fails, the plywood or plank deck underneath has often started to soften. We quote decking replacement as a separate line item so you know exactly what you’re paying for before we tear off.
Pricing for Roof Replacement in Inglewood, CA
Here’s what Inglewood homeowners can expect to pay, based on the jobs we’ve completed across the city:
- Flat roof replacement: $8,500 to $16,500
- Architectural shingle replacement: $11,500 to $19,000
- Asphalt shingle replacement (three-tab): $9,800 to $14,500
- New construction roofing: $13,000 to $24,000
- Roof decking replacement: $55 to $95 per sheet, depending on plywood vs. plank
What moves the number is the size of your roof, the condition of the deck underneath, the material you choose, and whether the existing system needs extra tear-off work like hot-mop removal. Every one of our quotes includes the Inglewood permit fee and inspection scheduling. We write estimates as line items, and what we quote is what you pay, no change-order games. Call (866) 974-2271 for your free estimate.
We Also Serve Cities Near Inglewood
If you’re looking for roof replacement near Inglewood, we serve the surrounding communities including Hawthorne, Del Aire, Lennox, and Alondra Park. Each has its own mix of older low-slope roofs and newer construction, and we approach every job with the same permit-first, documentation-complete process we use across Roof Replacement in Inglewood. Wherever your roof is, you’ll deal directly with us, not a dispatcher.
Serving Inglewood, CA — Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.
FAQs About Roof Replacement in Inglewood
Yes. The Inglewood building department requires a permit for roof replacement and, notably, for most roof repairs beyond basic shingle patching. A compliant roof replacement in Inglewood includes the permit fee, a deck inspection before covering, and a final inspection after completion. We handle all of it and hand you the signed permit card when the job passes.
Roof shingles installed in Inglewood should carry a 130 mph wind rating to meet the city’s code expectations for our wind exposure zone. The rating only holds up if the shingles are installed with the manufacturer’s required nailing pattern, which is why we document every nailing pattern during the deck inspection. Call (866) 974-2271 if you want us to check your current roof’s rating.
The constant aircraft vibration from LAX flight paths over Inglewood loosens flashing around skylights and vents over time and widens cracks in older membranes. We also see cracked skylights and loosened fasteners on homes in the Morningside Park and North Inglewood areas directly under the approach. If your roof hasn’t been inspected in a few years, this is the most common hidden damage we find.
Possibly. Some insurers in California offer wind-damage premium discounts when a roof replacement is documented with a permit, inspection record, and proof of 130 mph wind-rated materials. We provide all of that on every Inglewood job. You’d need to check with your carrier, but having the paperwork in hand is the prerequisite for any discount conversation.
Yes. We remove original built-up tar roofs on mid-century Inglewood homes regularly, particularly in the post-war tracts from the 1940s through 1960s. The work involves hot-mop removal of the old tar, deck inspection, and installation of a modern modified bitumen membrane like GAF’s system. It’s heavy, specialized work, but it’s a routine part of what we do across Inglewood.
Written by Manny Cordero, Owner at Koreatown Roofing, serving Inglewood with roofing inspection, repair, and replacement.